Lucinet floor waxes and protectors: a complete professional use guide
A practical guide to using Lucinet on linoleum, rubber, PVC and stone, with method, coverage and maintenance advice.
Why choose Lucinet for floor protection
Lucinet from the Lüster EcoLine range is a metallized floor wax for linoleum, rubber, PVC and stone. It creates a high-gloss protective film designed to withstand heavy foot traffic and black scuff marks while remaining easy to maintain.
In professional environments, a floor protector must do more than improve appearance. It should also support routine maintenance and help keep the surface looking even over time, especially in high-traffic areas where finish durability matters.
Step-by-step application method
For a consistent result, prepare the concentrate according to the dilution table, taking local water hardness into account. Lucinet can then be applied to the surface with a cloth, sponge or professional tool, spreading the product evenly.
For ordinary use, 1 thin coat is specified. Allow 30–40 minutes per coat. After the stated time, proceed according to the working method in place: remove with a clean cloth or rinse with water.
Dilutions and practical coverage
In ordinary treatment, Lucinet is used in 1 thin coat with an indicative coverage of 30–40 m² per litre. This helps cleaning companies and facility teams estimate product needs more accurately on medium and large floor areas.
For intensive maintenance, spray buffing is specified, with a reference of 4 litres. Actual consumption on site will also depend on the condition of the floor, the surface profile and how evenly the product is applied. Controlled, thin application is therefore important.
Practical advice for ongoing maintenance
One of Lucinet’s practical strengths is simple maintenance with a single-disc machine. This makes it easier to preserve the finish during routine care while supporting the product’s high-gloss appearance over time.
The recommended frequency is monthly or according to soil load. In professional sites, the best approach is to adjust the schedule to actual use conditions, giving closer attention to entrances, corridors and other heavily used zones.
FAQ
Which floor types is Lucinet suitable for?
Lucinet is suitable for linoleum, rubber, PVC and stone floors.
How many coats are specified for ordinary use?
For ordinary use, 1 thin coat is specified, with indicative coverage of 30–40 m² per litre.
How often should Lucinet be used?
The recommended frequency is monthly, or according to the actual level of soil and traffic.