Rocket Floors: complete professional guide to using this alkaline industrial floor cleaner
How to use Rocket on industrial floors: dilution rates, contact time and the right method with scrubber dryer or single-disc machine.
Why choose Rocket for industrial floors
Rocket from the Lüster EcoFactory range is a concentrated alkaline industrial floor cleaner for concrete, resin and porcelain stoneware floors. It is designed for daily cleaning where greasy soil, oil residues and technical dirt require a product suited to professional maintenance.
Its main strength is the ability to emulsify heavy oils and grease without leaving streaks. This makes it a practical choice for production areas, warehouses and service zones where cleaning performance must stay consistent over time.
Step-by-step method of use
For correct use, dilute the concentrate according to the dosage table, taking local water hardness into account. This is also relevant in many Swiss locations, where water conditions can affect practical product preparation. The solution can be applied with a cloth, sponge or professional equipment.
On larger floor areas, Rocket is especially suitable for use with a scrubber dryer or a single-disc machine. After application, allow the recommended contact time, then remove the loosened soil with a clean cloth or rinse with water, depending on the cleaning procedure in place.
Dilution rates and practical yield
For routine cleaning, the dilution is 10 ml per 1 litre of water, giving up to 100 litres of solution in a scrubber dryer from 1 litre of product. For heavier soiling, use 20 ml per 1 litre, giving 50 litres of solution. For intensive industrial use, the dilution is 50 ml per 1 litre, giving 20 litres of solution.
These three dilution levels make it easier to match consumption to the actual soil load on site. This helps avoid both underdosing and unnecessary overuse. Rocket is intended for daily cleaning frequency.
Practical advice for consistent results
When used in a scrubber dryer, the indicated contact time is 5 minutes. Respecting this stage supports the emulsification of heavy oils and improves the overall removal of soil from the surface.
For stable day-to-day results, set the dilution according to the type of dirt and consider local water hardness during preparation. Rocket is supplied in a 20 kg format, suitable for professional operations with regular floor-cleaning volumes.
FAQ
Which floors is Rocket suitable for?
Rocket is suitable for industrial floors in concrete, resin and porcelain stoneware.
What dilution should be used for daily cleaning?
For ordinary soil, use 10 ml per 1 litre of water. This allows up to 100 litres of scrubber-dryer solution from 1 litre of product.
What is the contact time in a scrubber dryer?
The indicated contact time is 5 minutes in a scrubber dryer.